GeoMx DSP Instrument User Manual
Select ROIs & Segment
Select ROIs
The Scan Workspace
(see Figure 21)
scan. If desired, you can also perform segmentation within the Scan Workspace or using an
external program. Once you have completed this process, the GeoMx DSP instrument begins
the collection of tags by exposing each segment of each ROI to UV light and aspirates material
from the solution into a well of the collection plate.
FOR RESEARCH USE ONLY. Not for use in diagnostic procedures.
36
allows you to position regions of interest (ROIs) on your
Figure
21:
Scan workspace diagram
MAN-10152-01 for software v2.5