Table of Contents
Advertisement
MAN-10152-01 for software v2.5
Identify Slides
Verify or complete the fields underneath each slide image
You may link slides to any slide records and scan parameters created earlier. See
and Scans outside GeoMx DSP Workflow on page
Slide Record: This record contains the metadata for the slide. You may click the Create
l
button or the Look Up button (see
Barcode: This field auto-populates with the slide record barcode (if entered) when linked to a
l
slide record.
Scan: This contains the parameters for the scan.
l
• If you established scan parameters in advance, they will appear in the drop-down
menu; select the desired set of scan parameters.
• If no scan parameters have been made, select Create New Scan from the drop-
down (see
Scan Parameters on page
Exclude this slot: Check this box to exclude the slide from further processing.
l
FOR RESEARCH USE ONLY. Not for use in diagnostic procedures.
GeoMx DSP Instrument User Manual
66.
Slide records on page
31).
Create Slides
30).
29
Advertisement
Table of Contents
