Table of Contents
Advertisement
GeoMx DSP Instrument User Manual
Administration Menu
A
U
DD
SER
1. On the User Management tab under
Administration , select the Create
User button.
2. The Create New User window will
appear
(see Figure 93)
required fields (indicated with *).
Create a username and password
l
for the new user. Do not use spaces
in usernames.
Active status can be Active or
l
Inactive (inactive users will not be
able to log into the system).
Account
Role
l
Administrator or General (general
is default; general users do not have
access to most of the Administrative
menu options). In order to change a
user's role (Admin to User, for
example),
that
assigned to no more than one
group.
Consider establishing more than one Administrator at your workplace so that you have at
least one backup if the primary Administrator is unavailable to perform administrative tasks.
Enter the user's e-mail address, phone number (if desired), and name.
l
3. Select Save.
FOR RESEARCH USE ONLY. Not for use in diagnostic procedures.
98
; fill out the
can
be
set
to
user
must
be
MAN-10152-01 for software v2.5
Figure 93: Add Users tab under Administration
Advertisement
Table of Contents
