Table of Contents
Advertisement
GeoMx DSP Instrument User Manual
Administration Menu
SSL S
ETTINGS
This is only relevant for computers used to remotely access the GeoMx DSP interface. This process
is not necessary for the on-board DSP computer.
If your browser does not recognize the GeoMx DSP software security certificate and warns
that the site is "not secure," follow your browser's prompts to proceed anyway. Follow the
instructions below to download and install the security certificate. Certificates expire
periodically; you may need to repeat this procedure to download and install an updated
certificate again in the future.
Installing your GeoMx instrument's unique self-signed root CA certificate
1. Login to the GeoMx system as an Administrative user.
Click on the Administration button and select the SSL
Settings button from the menu.
2. Click Download to download the security certificate
(see Figure
82). If prompted, browse to the preferred
download location. You may see a warning at the
bottom of your browser window: This type of file can
harm your computer. Do you want to keep systemca.crt
anyway? Click Keep.
3. Use a USB drive or your network to transfer the certificate file to your remote computer
and save it in an accessible location.
4. Navigate to the certificate, double click on it, and select Open
FOR RESEARCH USE ONLY. Not for use in diagnostic procedures.
92
MAN-10152-01 for software v2.5
Figure 82: SSL certificate download
(see Figure
83).
Figure 83: Open file window
Advertisement
Table of Contents
