nanoString GeoMx DSP User Manual page 83

MAN-10152-01 for software v2.5
Administration Menu
G M
ROUP ANAGEMENT
IMPORTANT: All Admin users are able to manage all groups.
In the GeoMx software you can create different user groups to control which users have
access to data. In the Group Management tab, you can create a new group or edit an existing
group (see Figure 71).
C G
REATING A ROUP
1. Click Create New Group.
2. Enter a new Group Name and select Save.
R
ENAMING A GROUP
1. Once on the Group Management tab under Administration, click the Rename button
next to the group of interest.
2. Enter the new name and select Save.
D
ELETING A GROUP
1. Once on the Group Management tab under Administration, click the Delete button
next to the group of interest.
2. Confirm to complete the deletion.
If deleting a group, that group's folders can be transferred to the All Users group. In Records
right-click on the folder of interest and select Edit; the All Users group should be selected.
Click Save to make this change go into effect.
FOR RESEARCH USE ONLY. Not for use in diagnostic procedures.
Figure 71: Group Management tab under Administration
GeoMx DSP Instrument User Manual
83