Installing The Bar Code Scanner; Figure 6-23 Inserting The Bar Code Alignment Pins Into - Sun Microsystems SPARCstorage Library Service Manual

6.5.3 Installing the Bar Code Scanner

Note – You must have Solstice Backup or a similar application to use the bar
code scanner.
1. Locate the four alignment holes on the CHM.
See Figure 6-23.
2. Match up the two locating pins on the bar code scanner with the first and
third alignment holes (starting from the outside) on the CHM.
See Figure 6-23. This action aligns the bar code scanner. Do not use the
second and fourth holes.
CHM
Figure 6-23 Inserting the Bar Code Alignment Pins Into the First and Third Holes
Removing and Installing Replacement Parts
Alignment holes
Bar code
scanner
Locating pins
6
6-31