Sun Microsystems SPARCstorage Library Service Manual page 29

The power supply assembly (see Figure 1-5 on page 1-6) is comprises:
Fan
Power switch
Power connector
Fuse
1.1.3 Front Internal Components
The tape library front internal components (see Figure 1-6 on page 1-8) consist
of:
Data cartridge magazine
Fixed cartridge holder
Data cartridge magazine
mounting plate
Cartridge handling
mechanism (CHM)
Bar code scanner (optional)
Idler pulley assembly
Tape drives
Product Description
Provides cooling.
Controls power on and off.
Part of the power supply assembly.
Part of the power supply assembly.
Holds the data cartridges.
Used to store a cleaning cartridge or as an extra data
cartridge holder.
Provides a mount for the data cartridge magazine.
Handles cartridges. The CHM is a robotic assembly that
picks and places cartridges and moves them between the
cartridge storage locations and the tape drives.
The CHM is mounted on the long axis assembly.
Located on the cartridge handling mechanism (CHM).
Allows the unit to read identification labels on data
cartridges.
Provides movement control for the long axis belt.
Contains up to two 8 mm half-height tape drives. If the
unit contains only one tape drive, you must install a
drive blank in the second slot.
1
1-7