To Set The Loop Option; Adjust Contrast; To Adjust The Contrast; Back Light - Sun Microsystems SPARCstorage Library Service Manual

2

2.3.2.4 Adjust Contrast

2.3.2.5 Back Light

2-20

To set the loop option

1. Select the Configuration Menu by pressing
2. Select Sequential Options by pressing
The following screen is displayed.
→ Loop:
Restart:
Loop2:
Restart2:
3. Select Loop for tape drive 1 or Loop2 for tape drive 2 by pressing
4. Set the loop option on or off by pressing
The Adjust Contrast option controls the brightness of the lettering on the
display panel.

To adjust the contrast

1. Select the Configuration Menu by pressing
2. Select Adjust Contrast by pressing
3. Raise the contrast by pressing
4. Press Enter to keep the changes.
Press Escape to leave the menu without making changes.
The Back Light feature turns the light in back of the display panel on or off.

To turn the back light on or off

1. Select the Configuration Menu by pressing
SPARCstorage Library Service Manual—June 1995
↓ ↑
or , then Enter.
↓ ↑
or , then Enter.
OFF →
ON
OFF
ON
← →
or .
↓ ↑
or , then Enter.
↓ ↑
or , then Enter.
→
or lower the contrast by pressing
↓ ↑
or , then Enter.
↑ ↓
or .
←
.