Figure 11-4 Installing The Sbus Card Extractor; Figure 11-5 Removing The Sbus Card - Sun Microsystems SPARCstation 4 Service Manual

FIGURE 11-4
6. Hold both ends of the card extractor. Pull upward slowly and evenly until the card
is disconnected.
FIGURE 11-5
7. Remove the card extractor from the SBus card (refer to Step 1).
8. Place the SBus card on an antistatic surface.
11-4 SPARCstation 4/Xterminal 1 Service Manual • January 1995
Installing the SBus Card Extractor
Removing the SBus Card
Insert card
extractor.