Sun Microsystems SPARCstorage Library Service Manual page 78

2
2-44
Use the following keys when viewing the SCSI reservations screen.:
↓
↑
The information in the SCSI Reservations screen is described in Table 2-5.
Table 2-5 SCSI Reservations Screen Display
Screen Option
Unit Reservation
1
0
Elem Reservations
Elem Addr
Elem Type
Host ID
Res ID
SCSI Sense Data
SCSI Sense Data is displayed in the console window on the Sun system. See
Table 2-2 on page 2-7 for a description of SCSI Sense Data.
SPARCstorage Library Service Manual—June 1995
To view an element with a higher address.
To view an element with a lower address.
Description
Displays the reservation status of the tape library and
the SCSI ID of the host (if reserved):
Reserved
Not reserved
Displays the element addresses currently set by the
MODE SELECT command. Displays the default
element addresses if no element addresses were set.
Element address
Element category. There are three categories: CHM,
CTS (tape drive), and cartridge slot. If the element is a
cartridge slot, its number is indicated as "Slot n."
Displays the SCSI ID of the host that currently has the
element reserved. If there is no reservation,
"-NONE-" is displayed.
Element ID that the element is reserved under. This is
a number assigned to the element by a host when the
reservation was made. If there is no reservation,
"-NONE-" is displayed.