Sun Microsystems SPARCstorage Library Service Manual page 84

2
2-50
2. Select the Drive Info Menu by pressing
The system displays this screen:
Drive 1 Status
Drive 2 Status
3. Display information about the selected tape drive by pressing
Enter.
For each tape drive (CTS) present, the system displays this screen:
CTS 1 STATUS
Type 8505XL
Present 1
Accessible 1
The following chart describes the tape drive information displayed on the
previous screen:
CTS 1 Top tape drive.
CTS 2 Second tape drive.
Type 8505XL Model number (8505XL) of the tape drive.
Displays 8 mm if a drive is not present.
Present Indicates if a tape drive is installed.
1 Tape drive present.
0 Tape drive not present.
Accessible Indicates if the tape drive is accessible to the CHM.
1 A cartridge is protruding from the tape drive or the drive is empty.
0 A cartridge is loaded in the tape drive or the drive status is unknown.
Clean Cleaning status.
1 Drive needs to be cleaned or the cleaning tape is used up.
0 Drive is clean.
Warning Not currently used.
SPARCstorage Library Service Manual—June 1995
↓ ↑
or , then Enter.
↑
↓
↓
↑ ↓
or , then