Sun Microsystems SPARCstorage Library Service Manual page 194

initiator
magazine
power-on self-test (POST)
small computer systems interface (SCSI)
SCSI address
SCSI bus
SCSI ID
target
Glossary-2
A host computer system that requests an operation to be performed by the
target.
A cartridge holder in the SPARCstorage Library that accommodates up to ten
data cartridges.
The process that occurs when the SPARCstorage Library performs its initial
power-on diagnostics.
An industry standard bus used to connect disk and tape devices to a
workstation.
See SCSI ID.
See bus.
A unique identifier assigned to each device or subsystem on the SCSI bus.
Also referred to as SCSI address.
A bus device (usually a controller) that performs an operation requested by an
initiator. The SPARCstorage Library is a target.
SPARCstorage Library Service Manual—June 1995