Sun Microsystems SPARCstorage Library Service Manual page 102

4
4.3 System Precautions
!
!
!
4-4
Before you begin, carefully read each of the procedures in this manual.
Persons who remove any of the outer panels to access this equipment must
observe all safety precautions and ensure compliance with skill level
requirements, certification, and all applicable local and national laws.
All procedures contained in this document must be performed by qualified
service-trained maintenance providers.
Caution – Do not make mechanical or electrical modifications to the
equipment. Sun Microsystems, Inc. is not responsible for regulatory
compliance of a modified Sun product.
Caution – To ensure reliable operation of your Sun product and to protect it
from overheating, openings in the equipment must not be blocked or covered. A
Sun product should never be placed near a radiator or heat register.
Warning – Sun products are designed to work with single-phase power systems
having a grounded neutral conductor. To reduce the risk of electrical shock, do
not plug Sun products into any other type of power system. Contact your
facilities manager or a qualified electrician if you are not sure what type of
power is supplied to your building.
Warning – Your Sun product is shipped with a grounding type (3-wire) power
cord. To reduce the risk of electric shock, always plug the cord into a grounded
power outlet.
Not all power cords have the same current ratings. Household extension cords
do not have overload protection. Do not use household extension cords with
your Sun product.
Caution – Power off the tape library before performing any of the procedures
described in this book. The AC power cord must remain plugged in to ensure
a proper ground.
SPARCstorage Library Service Manual—June 1995