Installing Software; Other Supported Software; Enabling Veritas Dmp - Sun Microsystems StorEdge 3000 Series Installation, Operation And Service Manual

5.7

Installing Software

The following software tools are available on the Sun StorEdge 3000 Family
Professional Storage Manager CD, provided with your array:
Sun StorEdge Configuration Service, a management and monitoring program
I
Sun StorEdge Diagnostic Reporter software, a monitoring utility
I
sscli(1M), a command line utility to download firmware and display the event
I
log
The Sun StorEdge 3000 Family Documentation CD provides the related user guides
with detailed installation and configuration procedures for these tools.
5.7.1

Other Supported Software

For other supported software, see the release notes for your array.
5.7.2

Enabling VERITAS DMP

To enable VERITAS Dynamic Multi-Pathing (DMP) support on VERITAS Volume
Manager Version 3.2 for a RAID array, perform the following steps.
1. Configure at least two SCSI channels as host channels (channels 1 and 3 by
default) and add additional SCSI host IDs if needed.
2. Connect host cables to the I/O host ports in step 1.
3. Map each LUN to two host channels to provide dual-pathed LUNs.
4. Add the correct SCSI string to vxddladm so VxVM can manage the LUNs as a
multi-pathed JBOD.
# vxddladm addjbod vid=SUN pid="StorEdge 3310"
# vxddladm listjbod
VID
================================================================
SEAGATE
SUN
5. Reboot the hosts. System reboot is required to implement these changes.
PID Opcode
ALL PIDs
StorEdge 3310
Page Code Page Offset SNO length
18 -1 36
18 -1
Chapter 5 First-Time Configuration
12
36 12
5-33