Sun Microsystems SPARCstorage Library Service Manual page 59

4. Make sure that there is at least one tape present and one empty slot before
beginning.
5. Select Demo Menu by pressing
6. Select Drive Demo by pressing
The screen displays:
Should cartridges
be loaded into
the drives?
When using standard tape cartridges, select NO using the arrow keys.
→ ←
Use or and press Enter.
• If you select YES, the CHM pushes the cartridge all the way into the drive.
• If you select NO, the CHM inserts the cartridge into the drive slot, but
does not push the cartridge all the way into the drive.
The tape drive will not automatically eject the cartridge.
The system displays the following:
Should the
cartridges be
scanned during
the demo?
7. Select YES if you want to include bar code scanning in the demo. Select
NO if you do not want to include bar code scanning in the demo.
→ ←
Use or and press Enter. The system begins the demo and displays this
screen:
DRIVE DEMO:
Total Cycles: N
Status: Move NN - NN
N
NN- NN
Troubleshooting
↓ ↑
or , then Enter.
↓ ↑
or , then Enter.
NO→
NO→
Indicates the number of cycles that have run so far.
Indicates the source and destination element indexes of
the current move.
2
2-25