Figure 5-7 Removing And Replacing The Top Cover On - Sun Microsystems SPARCstorage Library Service Manual

5
5.1.3 Removing the Top Cover
5-8
1. Obtain a TORX T-10 screwdriver.
2. Remove the four TORX T-10 screws from the top cover.
3. Pull up on the handle and slide the top cover away from the front panel.
Lift the cover off the chassis. See Figure 5-7.
Figure 5-7 Removing and Replacing the Top Cover on the Rack-Mounted Unit
SPARCstorage Library Service Manual—June 1995
Handle
Top cover