Sun Microsystems SPARCstorage Library Service Manual page 118

5
5.2 Tower Unit
5.2.1 Removing the Top Cover
5-12
8. Retract the anti-tilt bar by pushing it back beneath the cabinet.
See Figure 5-2 on page 5-3.
1. Turn off the power but leave the power cord connected to the wall outlet.
2. Attach a wrist strap to your wrist and to a metal portion at the rear of the
chassis.
3. Obtain a the following tools and equipment:
• T-20 TORX screwdriver
• T-10 TORX screwdriver
• Container for screws
4. Remove the two TORX T-20 screws from the back of the top cover.
5. Push up on the top cover from the rear and pull it towards the rear until
the front lip of the cover disengages from the front panel.
Remove the top cover. See Figure 5-10.
SPARCstorage Library Service Manual—June 1995