Installing Servers And Back-End Storage - Sun Microsystems StorageTek 5320 Getting Started Manual

2
C H A P T E R
Installing Servers and Back-End
Storage
Use the procedures in this chapter to install Sun StorageTek 5320 NAS Appliance
servers and back-end storage.
Note – This chapter generically describes how to install a server, which applies to
the Sun StorageTek 5320 NAS Appliance, the Sun StorageTek 5320 NAS Cluster
Appliance, the Sun StorageTek 5320 NAS Gateway System, and the Sun StorageTek
5320 NAS Gateway Cluster System. Back-end storage installation is for each Sun
StorageTek 5320 RAID Controller Unit and each Sun StorEdge 5300 Expansion
Enclosure (EU) as used with the Sun StorageTek 5320 NAS Appliance and Sun
StorageTek 5320 NAS Cluster Appliance.
This chapter describes the process of installing Sun StorageTek 5320 NAS Appliance
servers, controller enclosures, and expansion enclosures. It contains the following
sections:
"Standard Cabinets, Racks, and Rail Kits" on page 12
■
"Preparing for the Installation" on page 13
■
"Installing in the Cabinet" on page 18
■
"Attaching the CAM100 3RU Rails to a Cabinet" on page 21
■
"Installing an Enclosure in a Cabinet" on page 28
■
"Connecting the Power Cables" on page 48
■
"Setting the Tray ID" on page 49
■
"Back-End Storage Cabling" on page 51
■
The installation procedures in this chapter require the following items:
No. 2 Phillips screwdriver
■
No. 3 Phillips screwdriver
■
Antistatic protection
■
11