Sun Microsystems SPARCstorage Library Service Manual page 123

5.3 Tabletop Unit
1. Turn off the power but leave the power cord connected to the wall outlet.
2. Attach a wrist strap to your wrist and to a metal portion at the rear of the
chassis.
3. Obtain a the following tools and equipment:
• Phillips screwdriver
• T-10 and T-15 TORX wrench
• Container for screws
4. Remove both side panels.
Remove the six captive Phillips screws that secure each side panel to the
chassis.
5. Remove the external top cover.
Remove the three TORX T15 screws that secure the top cover to the back
panel. Lift off the top cover and set it aside.
6. Remove the four TORX T-10 screws from the internal top cover.
7. Pull up on the handle and slide the internal top cover away from the front
panel.
Lift the cover off the chassis. See Figure 5-7.
Internal Access
5
5-17