Table of Contents
Advertisement
2.
Create or select a MassLynx system and a project.
3.
In the MassLynx main window, select Instrument tab > Inlet Method.
See also:
4.
In the Additional Status tab, click
Preparing the system
Requirement:
can do so using vacuum filtration or helium sparging.
Appendix
See also:
Loading samples in the sample manager
The sample manager accommodates sample trays and vial holders. Carefully
insert the vials into the wells of the sample tray, and note their location for
sample identification.
online Help and the nanoACQUITY UPLC Operator's Guide, on the
See also:
nanoACQUITY UPLC documentation CD, for detailed information about
installing samples in the sample manager.
Setting temperatures
To set temperatures, you can use instrument methods, the console, or the
control panel.
The maximum temperature for the nanoTile's heated analytical channel is
65 °C.
nanoACQUITY UPLC System online Help to set temperatures.
See also:
2-12
Preparing the System
"Creating a method to control your system" in the online Help.
You must thoroughly degas mobile phases before their use. You
A.
(console icon).
Advertisement
Table of Contents
