Environmental Specifications; Electrical Specifications - Waters TRIZAIC UPLC System Manual

Environmental specifications

The following table lists the environmental specifications for the TRIZAIC
UPLC source and nanoTile.
Environmental specifications:
Attribute
Acoustic noise
Operating temperature
Operating humidity
Shipping and storage temperature
Shipping and storage humidity

Electrical specifications

The following table lists the electrical specifications for the TRIZAIC UPLC
source and the nanoTile.
Electrical specifications:
Attribute
Protection class
Overvoltage category
Pollution degree
Moisture protection
Line voltages, nominal
Voltage range
Frequency
Maximum power draw
a. Protection Class I
electrical shock. Class I identifies a single level of insulation between live parts (wires) and
exposed conductive parts (metal panels), in which the exposed conductive parts are connected
to a grounding system. In turn, this grounding system is connected to the third pin (ground
pin) on the electrical power cord plug.
b. Overvoltage Category II
a local level such as an electrical wall outlet.
C-2 Specifications
a
b
c
d
–
The insulating scheme used in the instrument to protect from
–
Pertains to instruments that receive their electrical power from
Specification
<65 dBA, system
4 to 40 C (39.2 to 104 F)
20% to 80%, noncondensing
40 to 60 C (40 to 140 F)
20% to 80%, noncondensing
Specification
Class I
II
2
Normal (IPXO)
Grounded AC
90 to 264 VAC
47 to 63 Hz
TRIZAIC UPLC source: 135 VA