Preventing Contamination - Waters TRIZAIC UPLC System Manual

B
Materials of Construction and
Compatible Solvents
This appendix describes the safety issues you must consider when parts
of the system are exposed to solvents.
Requirement:
can do this using vacuum filtration or helium sparging.
Contents:
Topic

Preventing contamination

Items exposed to solvent
Solvents used to prepare mobile phases
Preventing contamination
For information on preventing contamination, refer to www.waters.com, and
Controlling Contamination in LC/MS Systems (part number 715001307).
Items exposed to solvent
The items that appear in the following table can be exposed to solvent. You
must evaluate the safety issues if the solvents used in your application differ
from the solvents normally used with these items. See
To confirm the integrity of the source exhaust
Warning:
system, you must address any safety issues raised by the
contents of this Appendix.
You must thoroughly degas mobile phases before use. You
"Solvents used to
Preventing contamination
Page
B-1
B-1
B-2
B-1