Preparing The Intellistart Fluidics System; Installing The Reservoir Bottles - Waters Xevo TQD Operator's, Overview And Maintenance Manual

Preparing the IntelliStart Fluidics system

For additional information, see
Caution:
store large-volume solvent reservoirs on top of the instrument.

Installing the reservoir bottles

Use standard reservoir bottles (15 mL) for instrument setup and calibration.
Use the Low-volume Adaptor Kit (sold separately) to infuse smaller volumes.
The low-volume vials have a volume of 1.5 mL.
Required material
Chemical-resistant, powder-free gloves
To install the reservoir bottles:
Warning:
biohazardous and/or toxic materials. Always wear
chemical-resistant, powder-free gloves while performing this
procedure.
2-6 Preparing for Operation
page B-17
To avoid accidental spillage damage to the instrument, do not
The reservoir bottles can be contaminated with
and Appendix D