Change Language Feature Code - Inter-Tel AXXESS Administrator's Manual

AXXESS System Features
INTER-TEL AXXESS ADMINISTRATOR'S GUIDE – Issue 5.1, March 2000

CHANGE LANGUAGE FEATURE CODE

A station user can change the assigned language for the station by entering the Change Lan-
guage feature code only when the station is idle.
T
O CHANGE THE STATION
A keyset user can assign the Change Language feature code to any user-programmable key.
Changing a keyset's language automatically changes any display. For example, if a station
changes from English to Japanese while in do-not-disturb mode with message 02, the display
would change from English message 02 to Japanese message 02. NOTE: Only Digital keysets
can be used for viewing Japanese prompts. Analog keysets do not support Japanese displays.
Page 122
'
S LANGUAGE
Keyset: Enter the Change Language feature code (301) to change your station between
English and Japanese, as desired. The display changes to the current language.
Single-Line Set: Lift the handset and enter the Change Language feature code (301) to
change your station between English and Japanese, as desired. (To verify the current
language, you can call an AXXESSORY Talk application that does not override the
device language.)
:
Change Language Feature Code