Axxess System Administrator Features; Placing The System In Night Mode; Placing Nodes In Day Or Night Mode - Inter-Tel AXXESS Administrator's Manual

Administrator Procedures
INTER-TEL AXXESS ADMINISTRATOR'S GUIDE – Issue 5.1, March 2000

AXXESS SYSTEM ADMINISTRATOR FEATURES

Any display keyset station (attendant or non-attendant) can be assigned as a system administra-
tor. Administrator stations provide the following services:
•
•
•
•
•
•
•
Any keyset station can be programmed to be an Administrator station by the database pro-
grammer or by another Administrator station.
If a non-Administrator station user attempts to use the Administrator features, the user will
hear reorder tones and the display will show CANNOT ACCESS RESERVED FEATURE.

PLACING THE SYSTEM IN NIGHT MODE

An Administrator station can place the local node in day or night mode. The day/night mode
determines which lists the system will use for trunk access, toll restriction, etc.
Night mode also affects the night transfer relays on the Options Card (OPC). The relays are
activated when the system is placed in night mode.
T
O TURN NIGHT MODE ON OR OFF

PLACING NODES IN DAY OR NIGHT MODE

An Administrator station can place one or more nodes in day or night mode. The day/night
mode determines which lists the system will use for trunk access, toll restriction, etc.
The network determines the day/night mode status of a call based on the day/night mode status
of the node where the trunk resides.
T
O TURN NIGHT MODE ON
(1)
(2)
(3)
T
O TURN DAY MODE ON
(1)
(2)
(3)
Page 6
Place the local node or other nodes in the network in night mode or day mode
Set the date and time of the local node
Set the network date and time and re-synchronize clocks in the network.
Make database changes (see
Program system speed-dial numbers on the local node
Receive and clear displayed system and network alarms
Using diagnostic mode features:
— Freeze and unfreeze the database history for the local node or any node in the net-
work using programmed freeze zones
— Print error logs
— Seize specific devices for troubleshooting purposes
:
While on hook, enter the Night Ring On/Off feature code (9860). You hear a single
confirmation tone. The display shows NIGHT MODE IS ON (or OFF). Then, if night
mode was turned on, the display shows THE SYSTEM IS IN NIGHT MODE until day
mode is turned on.
:
While on hook, enter the Enable Network Night feature code (9861).
You are prompted to enter a node number. Enter the desired node number.
You hear a single confirmation tone. The display shows NIGHT MODE IS ON. Then
the display shows NODE X IS IN NIGHT MODE until day mode is turned on.
:
While on hook, enter the Enable Network Day feature code (9862).
You are prompted to enter a node number. Enter the desired node number.
You hear a single confirmation tone. The display shows DAY MODE IS ON.
page 9 for a list of programming areas)
AXXESS System Administrator Features