Remote Do-Not-Disturb Programming - Inter-Tel AXXESS Administrator's Manual

AXXESS System Features
INTER-TEL AXXESS ADMINISTRATOR'S GUIDE – Issue 5.1, March 2000
T
O CHANGE THE STATION PASSWORD USING REMOTE PROGRAMMING
(1)
(2)
(3)
(4)
(5)
(6)
(7)

REMOTE DO-NOT-DISTURB PROGRAMMING

T
O PLACE A STATION IN DO
NOTE
using a DISA line will hear confirmation tone followed by DISA dial tone. Display keyset
users will not hear confirmation tones but will see a prompt asking for the next entry.
(1)
(2)
(3)
(4)
Page 194
If calling from an outside telephone, access the system through a DISA line. Enter the
DISA security code (if applicable). You hear a confirmation tone.
If programming from another station, lift the handset or press the SPKR key.
Enter the Remote Programming feature code (359). You hear a confirmation tone. If
you have a display, it shows ENTER EXTENSION. (Executive Keyset users can press
the IC DIR key to use the intercom directory to look up a number.)
Enter the extension to be programmed. You hear a confirmation tone. If you have a dis-
play, it shows ENTER PASSWORD. If you entered an invalid extension number, you
will hear reorder tones and can try again.
Enter the extension's password followed by #. You hear a confirmation tone.
If you enter an incorrect password, the display will show INVALID PASSWORD.
Outside callers will be returned to dial tone and stations will return to the idle state.
Enter the Program Station Password feature code (392). You hear a confirmation tone.
If you have a display, it shows NEW PASSWORD.
Enter the new password, followed by #. You hear a confirmation tone.
Enter the new password again for verification, followed by #. You hear a confirmation
tone. If you have a display, it shows PASSWORD SAVED. Outside callers will hear
dial tone and stations return to the idle state.
- -
NOT DISTURB MODE USING THE REMOTE PROGRAMMING FEATURE
After each entry, non-display keyset users will hear a confirmation tone. Outside callers
If calling from an outside telephone, access the system through a DISA line. Enter the
DISA security code (if applicable). You hear a confirmation tone followed by DISA
dial tone.
If programming from another station, lift the handset or press the SPKR key.
Enter the Remote Programming feature code (359). If you have a display, it shows
ENTER EXTENSION. (Executive Keyset users can press the IC DIR key to use the
intercom directory to look up a number.)
Enter the extension to be placed in DND. If you have a display, it shows ENTER PASS-
WORD. If you entered an invalid extension number, you will hear reorder tones and can
try again.
Enter the extension's password, followed by #. If you have a display, it shows ENTER
FEATURE CODE.
NOTE
If you enter an incorrect password, the display will show INVALID PASS-
WORD and the call is disconnected. Station users will hear reorder tones.
:
Remote Do-Not-Disturb Programming
: