Replaceable Parts
Assembly Replacement Procedure
Assembly Replacement Procedure
The following steps describe how to replace an assembly in the analyzer.
Step 1. Identify the faulty group. Begin with
appropriate troubleshooting chapter that identifies the faulty assembly.
Step 2. Order a replacement assembly. Refer to this chapter for part numbers and ordering
information.
Step 3. Replace the faulty assembly and determine what adjustments and performance tests are
necessary. Refer to
Step 4. Perform the necessary adjustments. Refer to
Step 5. Perform the necessary performance tests. Refer to
6-4
Chapter 4 , "Troubleshooting."
Chapter 7 , "Repair and Replacement Procedures."
Chapter 3 , "Tests and Adjustments."
Chapter 3 , "Tests and Adjustments."
FieldFox Analyzer
Follow up with the
N9927-90003