Adjusting The Picture Controls; Main Menu - Extron electronics Multi-Graphic Processor MGP 464 User Manual

Quick Start — MGP 464, cont'd
Extron
Power
on
MGP 464 V1.00
2 sec.
Multi-Graphic
Processor
Menu
Auto
Image
Menu
Input
Configuration
Menu
Output
Configuration
Menu
Window
Configuration
Menu
Background
Capture
Menu
Comm. / IP
Configuration
Menu
Advanced
Configuration
Menu
Exit Menu
Menu
Press Next
Next

Main menu

Step 4
From the Advanced Configuration menu, change
the test pattern to Crop, and adjust your display's
positioning until all four sides of the crop pattern
are visible.

Adjusting the picture controls

Step 5
Use the Window Configuration menu to select a
window border color for each window. This will
aid in window sizing and positioning.
Default
Cycle
2 sec.
Step 6
Select input 1 for windows 1, 2, 3, and 4.
Step 7
Adjust windows 1, 2, 3, and 4 to full screen.
20 sec.
N
20 sec.
a.
20 sec.
b. Press the Window/Image Position button
20 sec.
c.
20 sec.
d. Repeat steps a through c for the remaining
N
20 sec.
Step 8
For each input, size and position the image
20 sec.
within all four windows as follows:
a.
20 sec.
b. Press one of the 19 input buttons.
N
c.
If your MGP is set to factory defaults,
you can select default window preset #1,
31, 61, 91, or 121 to set the windows to
full screen size. See "Recalling a window
preset" in chapter 3, "Operation," for
instructions on selecting one of these
presets.
Press one of the Window Select buttons to
select the window to adjust.
once, and turn the Adjust knobs until both
the H and V values = 0000.
Press the Window/Image Size button once,
and turn the Adjust knobs to the right until
they stop. The window size setting displays
the same resolution as the output.
windows.
When all the windows are at full size, you
must mute the other three windows while
adjusting the first.
Press one of the Window Select buttons to
select a window to adjust.
If a virtual input (5 through 19) is wired
to two or three input connectors (S-video
or component video, respectively), you
can press any of the buttons to which it is
connected to select it.
Press the Window/Image Size or the
Window/Image Position button twice.
The LCD window displays the number of
the input whose image you are sizing or
positioning.
MGP 464 • Quick Start QS-3