Reference Information; Mounting The Studiostation 100; Tabletop Use; Furniture Mounting - Extron electronics StudioStation 100 User Manual

Reference
Information
This section provides information about:
•
•
•
•
•
•
Mounting the StudioStation 100
The 1U high, half rack width, 9.5 inch deep StudioStation 100 Streaming Media Processor
can be:
•
•
•
•
See the StudioStation product page at

Tabletop Use

The StudioStation 100 includes rubber feet (not installed). For tabletop use, attach a
self‑adhesive rubber foot to each corner on the bottom of the unit.

Furniture Mounting

Furniture mount the StudioStation 100 using an optional under‑desk or through‑desk
mounting kit. Follow the instructions included with the mounting kit.
Table or Wall Mounting
Extron table or wall mounting brackets extend approximately 1/4 inch (6.4 mm) above the
top surface of the StudioStation 100 enclosure. This design allows an air space between the
mounting surface and the enclosure. Follow the instructions included with the mounting kit.

Rack Mounting

For rack mounting using the included rack mounts, do not install the rubber feet. Mount the
StudioStation 100 on a 19 inch universal or basic rack shelf.
Mounting the StudioStation 100
Supported File Types, Drive Formats, and Browsers
DataViewer
Streaming Method Overview
Estimating Storage Requirements for a Recording
Glossary
Set on a table
Mounted on a rack shelf
Mounted under a desk or tabletop
Mounted on a projector bracket
www.extron.com for compatible mounting kits.
StudioStation 100 • Reference Information 90