Table of Contents
Advertisement
•
Reset All IP Settings:
•
Reset to Factory Defaults: Press and hold the front panel Reset button for 9 secondsuntil the Power LED blinks once
For detailed information on each mode and its use, see the IPCP Pro Q xi and xi Series User Guide at www.extron.com.
Resources
Obtaining Control Drivers
Extron provides an extensive selection of device drivers available on the Extron website. If the system requires a control driver
that is not already available, you can request a new serial (RS-232), IR, or Ethernet driver from Extron.
The IPCP Pro PCS1 xi does not support IR learning. However, if you have another model of IPCP Pro xi, IPCP Pro, or IPL Pro
control processor, one that includes an IR receiver port, you can create your own custom IR device driver using IR Learner Pro
software. Follow the directions in the IR Learner Pro Help File to create a driver by using the remote control for that device and the
IR receiver port on the front panel of the control processor.
Obtaining Instructions, Information, and Assistance
A checklist of basic setup steps is provided at the beginning of this guide. For additional information see the help files and the
IPCP Pro Q xi and xi Series User Guide, available at www.extron.com.
If you have questions during installation and setup, call the
Control Systems Support Hotline (1.800.633.9877).
Locating Software, Firmware, and Driver Files on the Extron Website
There are three main ways to find software, firmware, and device drivers within www.extron.com:
•
Via links from the web page for the specific product
•
Download Center
Via the
•
Via links from search results
NOTES:
•
For some software you have the option to click the Download Now button to begin downloading the software file. For other
software there is a link for contacting an Extron support representative who can provide you access to the latest version.
To obtain Extron control product software, you must have an Extron Insider account. Extron provides training to our
customers on how to use the software. Access to the full features of Global Configurator Professional is available to
those who successfully complete Extron Control Professional Certification.
•
IP Link Pro Series RS-232 and Ethernet drivers are required. You must use serial and Ethernet drivers
developed specifically for the IP Link Pro platform. With the exception of IR device drivers, drivers used for the
previous generation IP Link (non-Pro) control processors are not compatible.
Press and hold the front panel Reset button until the Power LED blinks once at 3 seconds and
twice at 6 seconds. Release and momentarily press the Reset button within 1 second. The
LED blinks 3 times in quick succession upon successful reset.
Use this mode to reset all network settings to factory default values without affecting
user-loaded files. This reset mode also stops any running programs and disables 802.1X
authentication. Lastly, this mode resets the settings for both LAN and AV LAN ports, including
turning DHCP off.
at 3 seconds, twice at 6 seconds, and thrice at 9 seconds. Release and momentarily press
the Reset button within 1 second. The Power LED blinks 4 times in quick succession upon
successful reset.
Use this mode to return the control processor to factory default settings. This mode also
deletes all user-loaded files and configurations (except LinkLicense files), and it clears messages
in the event logs table. User-loaded digital certificates are deleted. The unit continues to run the user-
loaded firmware.
Extron S3 Sales & Technical Support Hotline
page (Click on the Download tab at the top of any page within www.extron.com.)
or the Extron S3
9
Advertisement
Table of Contents
