Operation; Before Every Operation Start; During Operation; Procedure In Case Of Accident Or Fault - Interroll SH 1100 Installation And Operating Instructions Manual

Before every operation
start

During operation

Procedure in case of
accident or fault
44
Interroll Module belt conveyor SH 1100
Initial startup and operation

Operation

4 Check the module for visible damage.
4 Ensure that all safety devices operate flawlessly.
4 Ensure that only authorized persons are in the operating area of the module.
4 Ensure that the module is running freely and that no parts are jammed.
4 Remove equipment or material that is not required from the operating area.
4 Specify and monitor correct placement of the conveying good.
WARNING
Danger from rotating parts
Crushing and serious injuries due to parts of the body and clothing being pulled into the
module!
4 Do not remove the protective covers.
4 Wear personal protective equipment.
4 Avoid jewelry and bracelets.
CAUTION
Danger from shearing between product and universal support of side guide
4 Do not reach in from the side.
4 Take additional protective measures.
4 If material is jammed between side guides, switch off the module and ensure that it cannot be
started accidentally, then remove the fault.
4 Press the Emergency Stop pushbutton, power it down and ensure that it cannot be switched
on accidentally.
4 In case of an accident: Provide first aid and make an emergency call, if necessary.
4 Inform qualified personnel.
4 Have the fault corrected by qualified personnel.
4 Restart the module only after this has been approved by qualified personnel.
Version 1.0 (06/2022) en
Translation of original operating instructions