Dangers; Safety Devices; Heat; Electricity - Interroll SH 1210 Installation And Operating Instructions Manual

Safety devices

Heat

Electricity

Rotating parts

Parts lying around or
falling off
Risk of injury due to faults
during operation

Insufficient hygiene

Version 1.0 (06/2022) en
Translation of original operating instructions
Interroll Roller curve SH 1210
Safety

Dangers

The following list informs you about the various types of danger or damage that may occur
while working with the module.
4 Perform any maintenance and repair work on the module only when it is powered down and
ensure that it cannot be started accidentally.
4 In an area frequented by people or if people can reach between conveying goods, take
additional protective measures.
4 Do not remove protective covers or housing.
4 Regularly check the safety devices.
4 Do not touch the motor/RollerDrive during operation. Risk of burns.
4 Reach into the module only if the module is de-energized.
4 Always keep the control cabinet closed. Before opening the control cabinet: Main power
switch to "OFF".
4 Never wear loose clothing.
4 Never wear jewelery, such as necklaces or bracelets.
4 If you have long hair, always wear a hair net.
4 Remove equipment or material which is not required from the workspace.
4 Wear safety shoes.
4 Specify and monitor careful placement of the goods on the conveyor.
4 Regularly check the module for visible damage.
4 Stop the module at once and ensure that it cannot be started accidentally in case of:
Smoke from a fire, unusual noise, blocked or defective conveying good, defective supports,
side guides or accessory devices, unauthorized removal of safety covers.
4 Promptly have qualified personnel determine the cause of the fault.
4 Immediately remove any escaping gear oil.
4 Do not step onto the module during operation.
4 Clean the module regularly.
4 Follow all notices relevant to hygiene in these instructions.

Maintenance intervals

4 Regularly perform maintenance and inspection work.
4 Use only OEM spare parts.
11