Interfaces To Other Devices; Operating Modes; Normal Mode; Special Mode - Interroll SH 1100 Installation And Operating Instructions Manual

Normal mode

Special mode

Special operating mode
Transport/storage
Assembly/initial startup
Cleaning
Maintenance/repairs
Troubleshooting
Fault elimination
Decommissioning
Disposal
12
Interroll Module belt conveyor SH 1100
Safety

Interfaces to other devices

Hazard locations may occur while integrating the module into a complete system. These are not
part of this manual and have to be analyzed during the installation and startup of the complete
system.
4 When combining the module with other modules or machinery, check for new hazard
locations before startup.
4 If necessary, take further construction measures.

Operating modes

The module is installed at the customer in a complete system and operated as part of the system.
Special operation refers to all operating modes that are required to guarantee and maintain
regular operation.
Explanation
Loading and unloading, transport and storage
Installation at the end customer and performing the test run
External cleaning without removing protective devices
Maintenance and inspection tasks
Troubleshooting in the event of a fault
Eliminating the fault
Removal from the complete system
Removal from the complete system and disassembly
Comment
-
-
When powered down
When powered down
-
When powered down
When powered down
When powered down
Version 1.0 (06/2022) en
Translation of original operating instructions