Interroll SH 1100 Installation And Operating Instructions Manual page 47

Version 1.0 (06/2022) en
Translation of original operating instructions
Interroll Module belt conveyor SH 1100
Cleaning
4 Wipe off larger, loose contamination.
4 Pre-clean with water (8 bar, 35 °C).
4 Direct the nozzle down onto the surfaces at an angle of 45°.
4 For a more thorough cleaning, clean seals, grooves and other recesses with a soft brush.
4 In case of heavy contamination, use a soft brush and/or a plastic scraper together with
spraying water.
4 Spray off with water (8 bar, 35 °C).
4 After cleaning, check surfaces, grooves and other recesses for residues.
4 Wipe the floor dry.
4 Observe the corresponding certificates at www.interroll.com.
47