Transport And Storage; Transport; After The Delivery; Storage - Interroll SH 1100 Installation And Operating Instructions Manual

Module belt conveyor - straight

Table of Contents

Interroll Module belt conveyor SH 1100

Transport and storage

WARNING

Risk of injury during transport

4 Fasten the module securely and slip-proof for transport.

4 Ensure that the lifting device (e.g. fork lift) is rated for the weight of the module.

4 Ensure that there are no persons under the suspended load while lifting and moving the

module.

4 Have any persons leave the danger zone.

4 Wear safety shoes.

4 Check correct fastening for transport.

4 Avoid strong impacts during transport.

4 Do not expose the module to strong temperature fluctuations since these could damage the

electrical components.

Loosen the transport locks around the package. The crossbeams above the top module can then

be removed, thereby exposing the module. The individual module is lifted out of the package

using a suitable lifting device.

4 Inspect module for transport damages.

4 Immediately notify the carrier and manufacturer in case of damages to avoid losing any

claims for compensation.

WARNING

Risk of injury due to improper storage

4 Do not stack modules. Do not place any other objects on the module.

4 Check module for stability.

4 If the module is not immediately placed in operation, store it at a location protected against

humidity and dust.

Version 1.0 (06/2022) en

Translation of original operating instructions

Table of Contents

Do you have a question about the SH 1100 and is the answer not in the manual?