Connecting Isdn Between Devices - Cisco CCNA NETWORK SIMULATOR Manual

Network Designer - Connecting ISDN between Devices
Manually connecting ISDN between Devices
Note: If using the Add Connector Wizard, select ISDN to be guided through the process.
1. Left-Click on the ISDN connection to add.
2. The New Connection box will appear, listing all Devices that have ISDN ports
correlating to the ISDN connection type that was selected.
3. Select a ISDN-capable Device to connect from the Available Devices box
4. Select an ISDN interface from the Interfaces box.
5. Repeat process for other devices
6. Click Finish when done.
Note: PRI interfaces are also supported, see the "Sequential Labs" for more information.
© 2004 Boson Software, Inc. All Rights Reserved.
66