Setting The System Timeout - Cisco CSACSE-1111-K9 - Secure Access Control Server Solution Engine Installation Manual

Chapter 4 Administering Cisco Secure ACS Solution Engine
To set the ACS SE system time and date with NTP:
Log in to the ACS SE. For more information, see
Step 1
Console, page
At the system prompt, type set time, and then press Enter.
Step 2
Result: The system displays the message:
Current Date Time Setting:
Change Date & Time Setting? [N]
To set the time zone, time, or date type Y, and then press Enter.
Step 3
Result: The system displays indexed time zones and the message:
[xx] (GMT -xx:xx) XXX Time.
Enter desired time zone index (0 for more choices) [x]:
Enter the desired time zone index number from the time zone setting list, and then press Enter.
Step 4
Tip
Result: The system displays the time zone setting.
At the
Step 5
At the
Step 6
want to use, and then press Enter.
Tip
Result: The system displays the message:
Successfully synchronized with NTP server
Current Date/Time Setting:

Setting the System Timeout

You can set a system timeout. This is the number of minutes that can pass with no activity on the serial
console before the console login times out.
To set the ACS SE system timeout:
Log in to the ACS SE. For more information, see
Step 1
Console, page
OL-9969-03
4-2.
Time Zone: (GMT -xx:xx) XXX Time
Date and Time: mm/dd/yyyy hh/mm/ss
NTP Servers: ("Ntp Synchronization Disabled" - or - List of NTP servers)
You can also type 0 (zero) and press Enter to see more time zone index numbers; or simply press
Enter to accept the existing time zone.
Synchronize with NTP Server?
Enter NTP Server IP Address(es):
If you want to configure multiple NTP servers, at the
enter multiple IP addresses, each separated by a space.
Time Zone: XXX
Date & Time:
NTP servers:
4-2.
Reconfiguring Solution Engine System Parameters
Logging In to the Solution Engine From a Serial
prompt, type Y, and then press Enter.
prompt, enter the IP address of the NTP server that you
Enter NTP Server IP Address:
Logging In to the Solution Engine From a Serial
Installation Guide for Cisco Secure ACS Solution Engine 4.1
prompt,
4-21