Transport And Storage; Warning Messages - Primes MicroSpotMonitor Plus HighBrilliance Original Instructions Manual

MSM+ HB
6

Transport and storage

6.1

Warning messages

WARNING
Risk of injury when lifting the device
Lifting and positioning heavy devices can, for example, stress intervertebral disks and cause
chronic changes to the lumbar or cervical spine.
X Use a lifting device to lift and position the device.
X Without a lifting device, several people must lift and position the device.
NOTICE
Damaging / destroying the device due to improper handling
Contamination can damage or destroy the optical components. Components may be dama-
ged if the device is subjected to hard shocks or is allowed to fall.
X Move the camera housing to home position before transporting / storing the device.
X The device must only be transported / stored with a mounted lock.
X Handle the device with care when transporting it.
X To avoid contamination, close the measuring objective with the supplied cover before trans-
porting / storing the device.
X If possible, transport / store the device in the original PRIMES transport case (optional).
The device only fits into the original PRIMES transport case (optional) when the camera housing is
in home position.
NOTICE
Damaging / destroying the device due to leaking or freezing cooling water
The device can be damaged by leaking cooling water.
Even if the pipe system of the cooling circuit has been drained, a small amount of water
always remains in the device. This can leak out and enter the interior of the device.
X Drain the pipe system of the cooling circuit thoroughly before transporting / storing the de-
vice. You can use compressed air for draining.
Attention: Do not use compressed air to drain the PowerLossMonitor PLM cooling circuit.
X Before transporting / storing the device, close the water connections of the cooling circuit
with the sealing plugs provided.
NOTICE
Damaging / destroying the device due to incorrect storage conditions
Incorrect storage conditions can damage / destroy the device.
X Only store the device within the permissible environmental conditions specified in chapter
"14 Technical data" on page 97.
Revision 00 EN - 02/2022 23