Hole for dowel pins
Grab handle
Fiber bridge
Dowel pin
34
4. Insert the enclosed dowel pins on both sides
5. Disassemble the two grab handles on the
Grab handle
6. Put the fiber bridge on the MSM+ HB.
7. Fasten the fiber bridge by means of two screws
into the hole provided.
MSM+ HB. To do this, loosen the visible screws
in the grab handle.
(M5 x 10 mm) on both sides. Please note that
longer screws (>10 mm) can block the Z-axis
underneath.
MSM+ HB
Revision 00 EN - 02/2022