FocusMonitor FM+
4.4
Scope of delivery and accessories
The following parts are included in the scope of delivery:
•
FM+
•
PRIMES power supply
•
Power cable
•
Two alignment tools
•
Patch cable Cat.5e, Cross-Over, 5 m
•
Patch cable Cat.5e, 5 m
•
PRIMES USB flash drive (PDF of operating manual, software, etc.)
•
Operating manual FM+
•
Operating manual LDS
The following accessories are available:
•
Transport and storage case
•
Measuring tip in a membrane box
•
Detectors with box and screwdriver for mounting
5
Transport and storage
NOTICE
Damage/Destruction of the device
The device's axes and carriers may be damaged if the device is subjected to hard shocks.
X Handle the device carefully when transporting or installing it.
NOTICE
Damage/Destruction of the device
Imbalance of the rotational disc can damage the device.
X Never operate the device without the measuring tip.
Remove measuring tip to avoid contamination
It is recommended to remove the measuring tip from the FM+ and place it in the supplied membrane box.
X Remove the measuring tip according to chapter 11.3 „Check/replace the measuring tip" on page 68.
Transport and storage in the optional transport and storage case
In order for the device to fit into the optional transport and storage case, the carriers must be moved to the
park position before being switched off, see chapter 9.3.3 „Disconnect device from the LDS and switch off"
on page 31.
X Optionally switch the device off and on again. The carriers of the device move to the park position after
approx. 10 seconds.
A defined locked area when using a rotated measuring tip prevents the device from reaching the park position.
X Remove the locked area according to chapter 9.5.1 „Define locked area" on page 37.
Revision 08 EN - 08/2023
15