Table of Contents
Advertisement
MSM+ HB
9.9.3
Measure beam pointing stability
DANGER
Serious eye or skin injury due to laser radiation
X Observe the warning messages in chapter 9.1 on page 44.
Starting measurement
1.
Switch on the laser.
2.
Enter z-position.
3.
Click the Start button.
The measurement begins.
During the measurement, the prog-
ress is shown in the following indica-
tors:
Pre-caustic
While the indicator is rotating, the z1 and
z2 positions along the beam propagation
are identified. The positions are optimized
according to Primes quality criteria.
After successful pre-caustic
measurement, the indicator lights up
green.
The process is visualized in the False-
color Image tool.
Measuring beam pointing
While the indicator is rotating, the beam
center and the angle are constantly deter-
mined.
The determined measuring points
are displayed in the coordinates of
the Beam Pointing Stability tool.
The current position of the beam is
marked with a large X, previous posi-
tions are marked with a small x.
Revision 00 EN - 02/2022
87
Advertisement
Table of Contents
