The start screen appears.
3.
Select the Measure operating mode.
Only if the Show start screen option is
disabled:
X Click on the Devices tab and then on
the +Connect to device button.
The Connections window appears.
If you have connected a power meter (e.g.
PowerLossMonitor PLM):
4.
First click on the power meter.
5.
Click on the button Connect to
device.
6.
Then click on the MSM+.
7.
Click on the button Connect to
device again.
If you do not use a power meter, follow
instructions 6. and 7. only.
If the device does not appear:
8.
Click on the Search the network
button
9.
If the device still does not appear in
the Connections window, see chapter
9.3.2 on page 49.
48
MSM+ HB
Revision 00 EN - 02/2022