MSM+ HB
Holes for
Mounting screws
Fiber bridge
Fiber holder
Revision 00 EN - 02/2022
4 Screws a.f. 2.5 mm
Fiber adapter
Adapter stop
1. Disassemble the cyclone.
2. Mount the fiber adapter on the fiber bridge.
To do this, attach the fiber adapter to the fiber
bridge with two screws. Do not fully tighten the
screws yet.
3.
The position of the fiber adapter is fixed with the
adapter stop. Press the fiber adapter against the
adapter stop and tighten the screws.
Cyclone and
alignment tool
33