Table of Contents
Advertisement
MSM+ HB
9.8.3
Measure a caustic automatically
DANGER
Serious eye or skin injury due to laser radiation
X Observe the warning messages in chapter 9.1 on page 44.
1.
Switch on the laser.
2.
Start the measurement by clicking on
the Start button.
The measurement can be ended
prematurely by clicking on the red
Stop button.
During the measurement, the pro-
gress is shown in the following indica-
tors:
Pre-caustic
While the indicator is rotating, the
measurement parameters are determined
automatically (for example measurement
window position, measurement win-
dow size, integration time, z-range). The
measurement parameters are optimized
according to Primes quality criteria.
After successful pre-caustic
measurement, the indicator lights up
green.
Measuring caustic
While the indicator is rotating, the actual
measurement is performed.
Measurement completed
The measurement, is completed.
3.
Switch off the laser after the
measurement is completed, unless
you want to perform further measu-
rements.
Revision 00 EN - 02/2022
83
Advertisement
Table of Contents
