Table of Contents
Advertisement
Connecting cooling circuit at MSM+ HB10
For packaging reasons the cooling water pipe of the absorber has been removed. The cooling water pipe
has to be reconnected with the absorber.
X Remove the sealing plug from both the water
pipe and the absorber.
X Insert the adapter into the connector of the water
pipe.
X Insert the adapter into the absorber.
X Connect cooling circuit.
You can use compressed air to drain the cooling
circuit of the MSM+ HB.
Fig. 8.5:
Cooling circuit connection at MSM+ HB10
40
Adapter
Water out
MSM+ HB
Water in
Revision 00 EN - 02/2022
Advertisement
Table of Contents
