Table of Contents
Advertisement
Transport and storage
5
Transport and storage
NOTICE
Damage/destruction of the device
Hard impacts or dropping can damage the optical components.
Handle the measuring device carefully during transport and installation.
6
Mounting
DANGER
Serious eye or skin injury due to laser radiation
An improper installation by unqualified personnel can lead to material damage or even personal injury.
Have the device installed by qualified personnel only. Qualified personnel must have basic knowledge
about working with high-power lasers, beam delivery systems and focusing units.
6.1
Conditions at the installation site
•
The device must not be operated in a condensing atmosphere.
•
The ambient air must be free of gases and aerosols that interfere with the laser radiation (e.g. organic
solvents, cigarette smoke, sulfur hexafluoride).
•
Protect the device from splashes of water and dust.
•
Operate the device in closed rooms only.
6.2
Installation in the laser system
The FPM is intended for the installation into a laser system. Therefore neither constructive nor safety related
modifications may be made to the FPM unless we have given our explicit written consent. In case of any
modifications, we do not accept any liability for resulting damages.
6.2.1
Prepare mounting
NOTICE
Damaging/destroying the device
Too little space in front of the shutter can damage the device.
Make sure that there is enough free space to open the shutter.
1. Switch off the laser beam.
2. Ensure that moving parts, e.g. robot arms, etc. are at a standstill and that they cannot be set in motion
unintentionally.
3. Check the space available before installing the device, especially the required space for the connection
cables and hoses/shutter.
Revision 06 EN 02/2023
15
Advertisement
Table of Contents
