Nanoflow Esi Source - Waters Xevo TQ-S Operator's, Overview And Maintenance Manual

3 Changing the Mode of Operation
To remove the combined APPI/APCI source
1. Prepare the instrument for working on the source (see
Warning:
with the probe and source; these components can be hot.
2. Remove the IonSABRE II probe (see
3. Disconnect the HT cable from the instrument's front panel.
4. Disconnect the APPI drive cable from the instrument's front panel.
5. Remove the source enclosure (see
6. Remove the corona pin (see
7. Fit the blanking plug to the pin's mounting contact.

NanoFlow ESI source

The NanoFlow source enclosure comprises the NanoFlow stage (for x-, y-,
z-axis adjustment), the sprayer-enclosure, and a microscope camera.
74 February 28, 2014, 715002212 Rev. C
To avoid burn injuries, take great care while working
page
page 105).
:
page 98).
page 67).
100).