Waters Xevo Tq-S - Waters Xevo TQ-S Operator's, Overview And Maintenance Manual

1 Waters Xevo TQ-S Overview

Waters Xevo TQ-S

®
The Waters
ionization (API) mass spectrometer. It is designed for routine HPLC/MS/MS
®
and UPLC /MS/MS analyses in quantitative and qualitative applications, and
can operate at fast acquisition speeds compatible with UltraPerformance LC
You can use the Xevo TQ-S with the following high-performance Waters
ZSpray™ dual-orthogonal API sources:
• Standard multi-mode electrospray ionization/atmospheric pressure
chemical ionization/combined electrospray ionization and atmospheric
pressure chemical ionization (ESI/APCI/ESCi
Requirement:
(IonSABRE™ II).
• Optional dual-mode atmospheric pressure photoionization (APPI)/APCI
• Optional low-flow ESI
• Optional NanoFlow™ ESI
• Optional atmospheric solids analysis probe (ASAP)
• Optional atmospheric pressure gas chromatography (APGC)
• Optional TRIZAIC
• Optional ionKey source
You can also use the Xevo TQ-S with the following optional third-party
sources:
• Direct analysis in real time (DART
• Desorption electrospary ionization (DESI)
• Laser diode thermal desorption (LDTD™)
For further details, refer to the appropriate manufacturer's documentation.
Available source options can vary, depending on the software you use to
operate the Xevo TQ-S. Refer to the MassLynx
more information about supported sources.
For mass spectrometer specifications, see the Waters Xevo TQ-S Site
Preparation Guide.
26 February 28, 2014, 715002212 Rev. C
®
Xevo TQ-S is a tandem quadrupole, atmospheric pressure
Dedicated APCI operation requires an additional probe
®
UPLC
®
)
®
)
® ®
or UNIFI online Help for
®
.