Fitting A Borosilicate Glass Capillary (Nanovial) - Waters Xevo TQ-S Operator's, Overview And Maintenance Manual

3 Changing the Mode of Operation
voltage (the voltage applied to the sprayer assembly) and the sampling
cone voltage are disabled.
High voltage cable
11. Close the instrument's source interface door.

Fitting a borosilicate glass capillary (nanovial)

Required materials
• Chemical-resistant, powder-free gloves
• Needle-nose pliers
• Borosilicate glass capillary
• Fused silica syringe needle or GELoader
• Fused silica cutter
78 February 28, 2014, 715002212 Rev. C
®
tip