Atmospheric Solids Analysis Probe; Apgc; Trizaic Uplc Source; Ionkey Source - Waters Xevo TQ-S Operator's, Overview And Maintenance Manual

1 Waters Xevo TQ-S Overview
This option uses a make-up liquid at the capillary tip that provides a
stable electrospray. The make-up flow rate is less than 1 µL/min.

Atmospheric solids analysis probe

The atmospheric solids analysis probe (ASAP) facilitates rapid analysis of
volatile and semi-volatile compounds in solids, liquids, and polymers. It is
particularly suited to analyzing low-polarity compounds.
The ASAP replaces the electrospray or IonSABRE II probe in the instrument's
source housing, and has no external gas or electrical connections.
See the Atmospheric Solids Analysis Probe Operator's Guide Supplement for
further details.

APGC

The Waters APGC couples an Agilent GC with the Xevo TQ-S. Doing so
enables you to perform LC and GC analyses in the same system, without
compromising performance. The APGC provides complementary information
to the LC/MS instrument, enabling analysis of compounds of low molecular
weight and low-to-intermediate polarity.
See the Atmospheric Pressure GC Operator's Guide Supplement for further
details.

TRIZAIC UPLC source

The TRIZAIC UPLC source accepts a nanoTile™ device, which combines the
functions of an analytical column, trapping column, and nanospray emitter.
This technology simplifies the implementation of capillary-scale
chromatography and analysis of limited-volume samples.
See the TRIZAIC UPLC System Guide for further details.

ionKey source

The ionKey source integrates UPLC separation into the source of the mass
spectrometer. The source accepts an iKey™, which contains the fluidic
connections, electronics, ESI interface, heater, e-cord, and chemistry.
Inserting the iKey simultaneously engages the electronic and fluidic
connections. This technology eliminates the need to manually connect
electronic cables and tubing, and simplifies the user experience.
34 February 28, 2014, 715002212 Rev. C